# @(#)B.11.31_LR vlanconf 
# vlanconf:  configuration values to create VLAN Virtual Interface.
#            This file will maintain the VLAN information across
#            reboot, and will be modified by HP SMH. User can also
#            edit the file. 
#
# VLAN_PHY_INTERFACE : Physical interface name, see nwmgr(1m)
#                      output. This value must be specified.
#
# VLAN_ID            : Unique VLAN id for VLAN. VLAN id is a
#                      positive integer value which can range
#                      from 0 to 4094. This value must be specified.
#
# VLAN_PRI_OVERRIDE  : The priority value to choose for outbound packets. 
#                      It tells the system what priority to choose, when
#                      tagging the packets with VLAN information.
#                      Allowed priority override levels are:
#
#                      CONF_PRI  - User specified priority, taken from
#                                  VLAN_PRIORITY[] will be used
#                                  (default if not specified).
#                      IP_HEADER - Valid only for IP packets. IP header ToS 
#                                  will be converted to 802.1p priority. For 
#                                  non-IP packets override level of CONF_PRI 
#                                  will be used.
#                      CONF_TOS  - User specified ToS, taken from VLAN_TOS[]
#                                  will be converted to 802.1p priority.
#                      Default value of CONF_PRI will be taken if not
#                      specified.
#
# VLAN_TOS_OVERRIDE  : ToS value to be used for inbound IP packets.
#                      Allowed ToS override levels are:
#
#                      IP_HEADER    - ToS value in the IP header will be used
#                                     (default if not specified).
#                      ETHER_HEADER - Ether header 802.1p priority will be
#                                     converted to ToS value.
#                      CONF_TOS     - ToS specified by the user, taken from
#                                     VLAN_TOS[] will be used.
#                      CONF_PRI     - 802.1p priority given in VLAN_PRIORITY[]
#                                     will be converted to ToS value.
#                      Default value of IP_HEADER will be used if not
#                      specified.
#
# VLAN_PRIORITY      : Priority is a positive integer value which can 
#                      range from 0 to 7. Default value of 0 will be 
#                      taken if not specified. VLAN_PRIORITY[] will be 
#                      used only when the VLAN_PRI_OVERRIDE[] or 
#                      VLAN_TOS_OVERRIDE[] values are set to CONF_PRI. 
#
# VLAN_TOS           : TOS is a positive integer value that ranges 
#                      from 0 to 255. Default value of 0 will be used 
#                      if not specified. VLAN_TOS[] will be used only
#                      when the VLAN_PRI_OVERRIDE[] or VLAN_TOS_OVERRIDE[] 
#                      values are set to CONF_TOS.
#
# VLAN_NAME          : Name of the VLAN. Its a simple string, which
#                      consists of alphanumeric characters. No special
#                      characters allowed. This value optional.
#
# VLAN_VPPA          : User requested VPPA for the VLAN Virtual Interface
#                      that will be created by the information given
#                      above. This value is optional If not specified
#                      system will assign a VPPA.
#
# For each VLAN configuration, add a set of variable assignments
# like the ones below, changing the index to "[0]", "[1]" et cetera.
#
#############################################################################

#############################################################################
# The VLAN_INIT_ARGS are reserved by HP. They are NOT user changable.

VLAN_INIT_ARGS="VLAN_PHY_INTERFACE VLAN_ID VLAN_PRI_OVERRIDE VLAN_TOS_OVERRIDE VLAN_PRIORITY VLAN_TOS VLAN_NAME VLAN_VPPA"

#
# Sample Entry
#
# VLAN_PHY_INTERFACE[0]=
# VLAN_ID[0]=
# VLAN_PRI_OVERRIDE[0]=
# VLAN_TOS_OVERRIDE[0]=
# VLAN_PRIORITY[0]=
# VLAN_TOS[0]=
# VLAN_NAME[0]=""
# VLAN_VPPA[0]=